Simmons 4800LF 2FT Bury Premier Frost-Proof Yard Hydrant

  • Model: 4802LF


Add to Cart:

Simmons 4800LF 2FT Bury Premier Frost-Proof Yard Hydrant
Certified Lead Free

Certified by Truesdail Laboratories. Meets all Federal and state Safe Drinking Water Acts and requirements.
Does not meet California Prop. 65 (Environmental Law)

• 3/4” NPT Female Inlet
• 3/4” Male Hose Thread Outlet
• All components identical to 800LF Series except head casting and handle are smaller. Does not have flow lock wheel
• Polyester Powder Coat finish

Not for sale in California

Hydrant Repair (pdf)

High quality construction features of the Clayton Mark Hydrant:

Heavy cast iron head assembly with a 3/4" brass discharge hose fitting
  • Heavy zinc plated steel riser pipe that is corrosion resistant
  • Galvanized steel operating rod
  • Long lasting Buna-N rubber plunger with a solid brass core
  • Integral valve seat that is cast into a bronze valve body. Valve body has a 3/4" female iron pipe thread with six flow channels built into the bottom of the valve for better flow and less debris blockage
  • Valve body has a 1/8" FPT drain hole ( use a 1/8" Brass street ell & a 1/8" x 2" brass nipple pointed in a downward direction to assist good hydrant drainage )
  • Hydrants are fully adjustable and are rated to 80 psi
  • Packing is Teflon filled graphite. When selecting hydrant, keep in mind that the overall length of a hydrant is 30" longer than the bury depth
  • These standard 3/4" hydrants have a 3/4" FPT inlet at the base of the valve body, use 1" galvanized steel riser pipe and a 3/4" male hose thread connection on the hydrant head. The flow rate of standard hydrants is approximately 45 gallons per minute at 50 psi.

Shopping Cart  [more]

Your cart is empty.