Clayton Mark Frost Proof Yard Hydrant (2ft Bury)

  • Model: 54512NL


Add to Cart:

No Lead 54512NL Clayton Mark Frost Proof Yard Hydrant (2ft Bury)

Packed securely in individual heavy weight carton.
Overall Length 54"
Flow rates 45gpm @ 50psi

  • Fully frost proof, shut-off valve below frost line.
  • Heavy cast iron head with 3/4" brass discharge connection and bucket hook.
  • Can be padlocked.
  • Heavy, galvanized steel, corrosion resistant, 1" stand-pipe.
  • Galvanized carbon steel connecting rod. Stainless Steel operating rod.
  • Long lasting Buna-N rubber plunger with solid brass core.
  • Integral valve seat cast into BRASS valve body. 3/4" FPT connection with double bypass bottom valve for superior flow, less risk of debris blockage. Less risk of debris blockage.
  • 1/8" FPT drain hole.
  • Rated to 80 PSI, adjustable
  • CE certified.
  • Lead Free: Third Party Certified 2NSF/ANSI 372.

Customers who bought this product also purchased...

High quality construction features of the Clayton Mark Hydrant:

Heavy cast iron head assembly with a 3/4" brass discharge hose fitting
  • Heavy zinc plated steel riser pipe that is corrosion resistant
  • Galvanized steel operating rod
  • Long lasting Buna-N rubber plunger with a solid brass core
  • Integral valve seat that is cast into a bronze valve body. Valve body has a 3/4" female iron pipe thread with six flow channels built into the bottom of the valve for better flow and less debris blockage
  • Valve body has a 1/8" FPT drain hole ( use a 1/8" Brass street ell & a 1/8" x 2" brass nipple pointed in a downward direction to assist good hydrant drainage )
  • Hydrants are fully adjustable and are rated to 80 psi
  • Packing is Teflon filled graphite. When selecting hydrant, keep in mind that the overall length of a hydrant is 30" longer than the bury depth
  • These standard 3/4" hydrants have a 3/4" FPT inlet at the base of the valve body, use 1" galvanized steel riser pipe and a 3/4" male hose thread connection on the hydrant head. The flow rate of standard hydrants is approximately 45 gallons per minute at 50 psi.

Shopping Cart  [more]

Your cart is empty.